LG LS-L1210HL - Slide Switch Operation; Forced Operation Mode

F
.o
Q_
0
Slide Switch Operation
FORCED OPERA TION
Opera,ionprocedureswhentheremotecon_l can'tbe
used.
Openthefrontpanelupwardandmovethe Slide
Switchtothe Forced(:_oera_onposition.
Ifyouwantto stopoperation,movetheSlideSwitchto
theAutoRestartortheRemoteCorral pgsil_on.
Incasethepewercomesonagan afterpowerf_lure
ontheForcedOpe_ posif_on,theopera_ng
condil_onsareautomaticallysetasfollows:
DuringForcedOperation,theini_ modecon_nues.
Open the front
panel upward
Operatingmode
IndoorFANSpeed
Se_ingTemperature
CoolingModel
Cooling
High
22°C
RoomTemp.>24°C
Cocking
High
22°C
Heat pgrnpModel
21°C_<RoomTemp.<24°C
HealthyDehumidification
HealthyDehumidticationRule
23°C
RoomTemp.< 21°C
Heating
High
24°C
Auto restart
Incase thepower comesonagainafter a power
failure, Auto RestartingOperation isthefunction to
operate proceduresautomaticallyto the previous
operatingconditions.
If you want to usethis operation,Openthe front
panel upwardand movethe slideswitchto the
Auto Restart position.
If you do not want to usethis operation,move the
Slide Switch to the RemoteControlposition.
Openthefront
panelupward
When you are out for a while, put the
Slide Switch on the Remote Control.
Helpful information
Fan speed and cooling capacity. .,:-
The coolingcapacityindicated in the specification is the ___ ,_
value when thefan speed is set tohigh,and the capacitywill
be lower at lowor medium fan speed.
Highfan speed is recommendedwhen youwishto cool the _'_ _Xx_"_._5 _
room quickly.
@