M
Healthy Dehumidification Operation
Press the StaWStop button.
The unit will respond with
a beep.
2
Open the door on the remote control. To select Healthy
Dehumidification Operation, press the Operation Mode
Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the arrow.
" °IP °
d J
Cooling Auto DehHealthyunddiflcaljOeHeating
(P=pu_pm0d__1
3
Set the fan speed again withthe door _
of the remote control still closed. You
can select the fan speed in four steps-
low, medium, high, or CHAOS. Each
time the button is pressed, the fan
speed mode is shifted.
Natural wind by the CHAOS logic
_3For more fresh feeling than otherfan speed, pressthe Indoor Fan
Speed Selector and set to CHAOS mode. In this mode, the wind
blowslike natural breeze by automaticallychanging fan speed
accordingtothe CHAOS logic.
J
I During Healthy Dehumidification Operation:
'._lIf you select the dehumidificationmode on theoperationselection button, theNC starts to run the
dehumidificationfunction, automaticallysettingthe roomtemp. and airflowvolumetothe bestcondition
fordehumidificationbased on the sensedcurrentroomtemp.
In thiscase, however,the settingtemp. is notdisplayedin the remotecontroland youare not able to
controlthe roomtemp. either.
Ij During the healthy dehumidificationfunction,the airflowvolumeis automaticallyset accordingto the
optimizationalgorithm responding to the current roomtemp. status and makes the room condition
healthyandcomfortableeven inthe high humidityseason. ,,
9 _
To Next Page
Loading...
