Fig. 10
T
I
M
E
M
O
D
E
T
E
M
P
P
O
W
E
R
F
A
N
S
P
E
E
D
Line Cord Plug Use Wall Receptacle
230V/208V
tandem type
Power Supply
Use 15 AMP circuit.
Refer to nameplate for
correct fusing.
16
Attach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Fig.10)
Lift the inlet grille and secure it with a screw (Type A)
through the front grille.(See Fig. 10)
Window installation of room air conditioner is now
completed. See ELECTRICAL DATA for attaching
power cord to electrical outlet.
Electrical Data
All wirring should be made in accordance with local electrical codes and regulations.
NOTE:
Aluminum house wiring may pose special problems.
Consult a qualified electrician.
To Next Page
Loading...
