LG M09AWN-NB11 - Energy-Saving Cooling Mode; Display Screen Brightness; Setting the Current Time

OPERATING INSTRUCTION
13
ENGLISH
Energy-Saving Cooling Mode
Energy-saving cooling mode can save energy
in cooling operation, because it can operate
efficiently by setting body-adaptation time ac-
cording to the change of time and tempera-
ture and adjusting desired temperature
automatically.
1 Press the ON/OFF BUTTON to start the
unit.
2 Open the cover of the remote controller.
Select cooling operation.
3 Press the energy-saving cooling mode but-
ton.
4 To cancel the energy-saving cooling mode,
press the Energy-Saving Cooling ModE but-
ton again and unit will operate in previous
mode(Cooling mode).
Display screen brightness
You can adjust the brightness of the
indoor unit display screen.
1 Open the remote control cover.
2 Press
P
repeatedly to set the brightness.
Setting the Current Time
1 Press the TIMER BUTTON For 3 seconds.
2 Press the TIMER SETTING BUTTONS until
the desired time is set.
- The order of a.m. and p.m. -> hour -
>minute is repeated whenever you press
the < > button.
- By pressing the button, you can set
the current time.
3 Press the SET/CLEAR button.
NOTE
!
Check the indicator for a.m. and p.m.