9
Connecting to External Devices
• Select RGB : 15-pin
D-Sub
analog signal.
10.
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button at the back side of the product.
RGB
DVI
INPUT
•
How to connect to two computers.
Connect the signal cables (
DVI and D-Sub) to each computer.
Press the INPUT button in a remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
Note
1
2
8.
9.
Select
gray monitor icon
and then press the right button of the mouse.
1
2
Select 'Clone Main with monitor' menu.
Click
'Yes'
button.
To Next Page
Loading...
