15
Listen to the cassette tapes - More you can do
Playing Fast backward or Forward
After pressing ./> (bb/BB on the remote control) during playback,
press B at a point you want.
Auto Reverse Deck
1 Press TAPE to select “TAPE-2”.
2 You can set the tape to play one side , both sides one time , or
both sides repeatedly , by pressing REV. MODE one or more times.
Dubbing
This function allows you to record from tape to tape.
1 Press TAPE to select “TAPE-1”.
2 Insert the tape as follows.
TAPE1 - Insert a playback tape to dub.
TAPE2 - Insert a blank tape.
3 Press DUBB. “DUBBING” shows. Dubbing starts.
4 To stop dubbing, press x.
Listening to the cassette tapes
1 Open the tape door
2 Insert the tape
3 Close the tape door
4 Select the TAPE function
5 Start the tape playing
6 To stop a tape playing
ON PLAYER
Z PUSH EJECT
TAPE
B
x
ON REMOTE
FUNCTION
B
x
Listening to the radio - More you can do
Looking for radio stations automatically
Press ./>
on the front panel (
TUN.- /TUN.+ on the
remote control)
for
more than 0.5 second. The tuner will scan automatically and stop when it
finds a radio station.
Deleting all the saved stations
1 Press and hold PROG./MEMO. “ERASE ALL” shows.
2 Press PROG./MEMO. to erase all the saved stations.
Improving poor FM reception
Press PLAY (B) (MO./ST.) on the remote control. This will change the tuner
from stereo to mono and usually improve the reception.
Listening to the radio
1 Select FM/ AM
2 Select the radio station
3 To ‘save’ a radio station
A preset number will show in
the display.
4 Select the preset number
5 To confirm
press
Up to 50 radio stations can be
saved
6 To select a ‘saved’ station
press
TUNER
./>
b / B
b / B
FUNCTION
TUN. +/-
PROG./MEMO.
PRESET U u
PROG./MEMO.
PRESET U u
ON PLAYER
ON REMOTE
To Next Page
Loading...
