23
WATCHING TV
ENGLISH
WATCHING TV
Turning the TV on for the rst
time
When you turn the TV on for the rst time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
The Power indicator turns red and the TV
switches to Standby mode.
2 In Standby mode, press the power button on
the remote control or local key to turn the TV
on. The Initial setting screen appears if you
turn the TV on for the first time.
y
You can also access Factory Reset by
accessing OPTION in the main menu.
NOTE
3 Follow the on-screen instructions to customize
your TV settings according to your
preferences.
Menu Language
Selects a language to
display.
Mode Setting
Selects Home Use for
the home environment.
Time Setting
Sets the time.
Auto Tuning
Scans and saves
available programmes
automatically.
y
To display images in the best quality for
your home environment, select Home
Use.
y
Store Demo is suitable for the retail
environment.
y
If you select Store Demo, any
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
NOTE
4 When the basic settings are complete, press
the OK .
y
If you do not complete the Initial setting, it
will appear whenever the TV turns on.
y
Disconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
NOTE
5 To turn the TV off, press the power button on
the remote control.
Watching TV
1 In Standby mode, press (POWER) to turn
the TV on.
2 Press INPUT and select TV.
3 To turn the TV off, press (POWER).
The TV switches to Standby mode.
Managing programmes
Automatically setting up
programme
Use this to automatically nd and store all avail-
able programmes.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP and press OK
.
2 Press the Navigation buttons to scroll to
Auto Tuning and press OK .
3 Press the Navigation buttons to scroll to
To Start and select To Start to begin auto
tuning. The TV scans and saves available
programmes automatically.
4 When you return to the previous menu, press
ꕣ
BACK.