Wired remote controller 2 + Indoor unit 1
1. It is possible to connect two wired remote controllers (Max.) with one indoor unit.
Set only one indoor unit to Master, set the others to Slave.
Set only one wired remote controller to Master, set the others to Slave.
2. Every types of indoor unit is possible to connect two remote controller.
3. It is possible to use wireless remote controller at the same time.
4. It is possible to connect with Dry Contact and Central controller at the same time.
5. In case of any error occurs at indoor unit, display on the wired remote controller.
6. There isnʼt limits of indoor unit function.
LGAP Network System
Display Error Message
Master
Master
Slave
or
Slave
Mas te r
Mas te r
PZCWRCG3
Mas te r S lav e
PZCWRC2
Indoor unit 2 EA +Wired remote controller
❈ PZCWRCG3 cable used for connection ❈ PZCWRC2 cable used for connection
Indoor unit 1 EA +Wired remote controller 2EA
It is possible to set group control by using below accessories.
5. Accessories for group control setting
Apply totally enclosed non combustible conduit in case of local building code Requiring plenum
cable usage.
To Next Page
Loading...
