EasyManua.ls Logo

LG Music Flow H3 - Wiring and Power; Power Requirements; Mains Plug and Wiring

LG Music Flow H3
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
y
The apparatus shall not be exposed to water (dripping or splashing)
and no objects lled with liquids, such as vases, shall be placed on the
apparatus.
y
For safety marking information including product identication and
supply ratings, please refer to the main label on the bottom or the
other surface of the product.
POWER: This unit operates on a mains supply of 200-240V~, 50-
60Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug.
When replacing the fuse, always use of the same rating approved to
BS 1362. Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your dealer. If the type of plug supplied
is not suitable for the mains sockets in your home, then the plug
should be removed and a suitable type tted. Please refer to the wiring
instructions below:
Warning: A mains plug removed from the mains lead of this unit must
be destroyed. A mains plug with bared wires is hazardous if inserted in a
mains socket. Do not connect either wire to the earth pin, marked with
the letter E or with the earth symbol 6 or coloured green or green and
yellow. If any other plug is tted, use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in accordance with
the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the
mains lead of this unit may not correspond with the coloured marking
identifying the terminals in your plug, proceed as follows: The wire
which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black. The wire which is coloured
brown must be connected to the terminal which is marked with the
letter L or coloured red.

Related product manuals