Connecting 13
Connecting
2
1. Plug the speaker into an electrical outlet. The
Network status LED starts to blink white.
2. On your smart device, launch Music Flow Player
app. Select [Start] to install the speaker.
3. Check the Network status LED on the
speaker and select [Next] to go to the next
screen.
4. Select [Wired connection] on the screen.
5. Connect one end of the LAN cable to the
speaker’s ETHERNET port and connect the other
end to your wireless router.
Wait a moment until
Network status LED
stops blinking and stays white.
6. Then select [Next] on the screen.
To Next Page
Loading...
