LG Music Flow NP8340 (H3) - Connecting the Speaker to Your Network Via the Wi-Fi Setup Method

Connecting 17
Connecting
2
Connecting the speaker to
your Network via the Wi-Fi
Setup Method (iOS)
Connection overview
Broadband
service
Router
Rear of the speaker
1. Plug the speaker into an electrical outlet. The
Network status LED starts to blink white.
2. On your smart device, launch Music Flow Player
app. Select [Start] to install the speaker.
3. Check the Network status LED on the
speaker and select [Next] to go to the next
screen.
4. Select [Wireless connection] on the screen.