LG MW121C4 NHM0 - SLEEP MODE SETTINGS; COMFORTABLE SLEEP MODES

21
EN
Four Sleep Mode a
Sleep mode can be set in Cooling, Heating or Drying mode.
This function gives you a more comfortable environment for sleep.
• The appliance will stop operation automatically after operating for
8 hours.
• Fan speed is automatically set at low speed.
• Each time Sleep button is pressed.
Sleep 1 Sleep 2 Sleep 3 Sleep 4 Quit Sleep Mode
Sleep mode 1
Set temperature will rise by 2 °C at most if the appliance operates in
cooling mode for 2 hours constantly, then keeps steady.
Set temperature will decrease by 2 °C at most if the appliance
operates in heating mode for 2 hours constantly, then keeps steady.
Sleep mode 2
Set temperature will rise by 2 °C if the appliance operates in cooling
mode for 2 hours constantly, decrease by 1 °C after 6 hours, then
decrease by 1 °C after 7 hours.
Set temperature will decrease by 2 °C if the appliance operates in
heating mode for 2 hours constantly, rise by 1 °C after 6 hours, then
rise by 1 °C after 7 hours.
Sleep mode 3
Set temperature will rise by 1 °C if the appliance operates in cooling
mode for 1 hour, rise by 2 °C after 2 hours, then decrease by 2 °C
after 6 hours, decrease by 1 °C after 7 hours.
Set temperature will decrease by 1 °C if the appliance operates in
heating mode for 1 hour, decrease by 2 °C after 2 hours, then rise by
2 °C after 6 hours, rise by 1 °C after 7 hour.
Sleep mode 4
Set temperature will keeps steady.
NOTE
• Press Jet Mode ,Smart, Mode, Sleep or Fan Speed button
cancel Sleep mode.
• By pressing “Sleeping mode” four times, or selection other modes
like Jet Mode, Smart, Fan Speed, you could cancel the sleeping
function of those units without four sleeping curves.
• Heating is not available for cooling only air conditioner.
Dual
Sensing
Mode
Light
Off
Fan
Speed
Smart
Cloc
kS
leep
Swing Swing
Jet
Mode
Room
Temp
Timer
Off
Timer
On
Temp.