LG MW242H4 - CONNECTING OF THE CABLE; Circuit Breaker; Indoor Unit

13
EN
CONNECTING OF THE CABLE
Circuit Breaker
Between the power and the appliance, install a
certified circuit breaker. The interrupting device
should be equipped to properly block all power
sources.
Main Power Source
Air Conditioner
Circuit
Breaker
Model Circuit Breaker
MW122C4
MW122H4
16 A
MW182C4
MW182H4
20 A
MW121C4
MW121H4
MW242C4
MW242H4
25 A
NOTE
• Check whether the current capacity of the
selected cable and wiring exceeds the rated
capacity of the recommended circuit breaker.
Indoor Unit
Connect the power cord to the indoor unit by
connecting the wires to the terminals on the control
board individuallyin accordance with the outdoor unit
connection.
• After loosening the screws sufficiently, insert the
wires. After that, be sure to tighten the screws and
secure with clamps.
Type 1
Type 2
NOTE
• For some models, it is necessary to remove the
cabinet to connect to the indoor unit terminal.