LG ND5630 - Power Connection and Ferrite Core; Connecting the AC Adapter

Getting Started10
Getting Started
1
Connecting the AC
Adapter
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet. Then
the unit goes into standby mode.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
>
Caution
About Ferrite Core
(Optional)
This ferrite core can reduce noises.
How to attach the ferrite core
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the portable cable and USB cable on the
ferrite core.
3. Close the ferrite core until it clicks.