Troubleshooting
23
Troubleshooting
Software Update
When the MUSICow product is connected to your home
network, check whether the rmware version is the latest on all
speakers and the Music Flow Player application.
Your MUSICow product might require a more recent rmware
to be installed for optimal operation.
[Settings
à
Version Info]: you can check if your speaker has the
latest rmware.
How can I initialize speaker?
If you press down (ADD) button until Beep sounds once, the
network related settings are initialized. (For sound bar, “DISABLED”
is displayed in the display window.)
If you press down
(ADD) button until Beep sounds twice,
factory initialization is performed. (For sound bar “RESET” is
displayed in the display window.)
Speaker is not connected.
1. For a speaker that is already connected, make sure the
phone is connected to the same router as the speaker. If not,
connect to the same router, also check the following.
1-1. Set Power off / on, and check the connection.
1-2. If it is not solved by 1-1, close the application and run
again.
1-3. If it is not solved by 1-2, reset the Speaker and
reconnect. To reset, press and hold the “ADD” button for
8 seconds until you hear one beep.
1-4. If it is not solved by 1-3, delete the App and reinstall,
then try again. To reset, press and hold the
(ADD)
button for 8 seconds until you hear one beep.
To Next Page
Loading...
