(11-1) Tilt and hold the stand bridge with both hands and then insert Stand Latch into the hole of Cover, Rear. (3ea)
(11-2) Assemble the Stand with 5ea Screw.
11-1 11-2
※ Fix the Screw 5ea
※ Must need at least 2 men.
◀ A man holding the head part
▼ A man inserting the Stand
11-2
11-2
11-2
11-2
11-2
Cover, Rear Hole
Stand Latch
Stand Bridge
※ Grip the both sides of the stand bridge.
Insert the latch into hole
To Next Page
Loading...
