You can only change the settings of the HDMI IN you are watching at the time.
You can specify a different setting for each HDMI port.
Certain 8K input/decoding standards may not be supported. An additional device may be
necessary to support certain 8K standards. Upscale and enhanced 8K images will vary
depending on the source content.
Quick Media Switching
When content with a different number of frames per second (FPS) is played on an
external device that supports QMS, it makes the screen transition smoothly without
interruption.
Only applicable to Some models.
SIMPLINK (HDMI-CEC)
You can conveniently control and use various multimedia devices connected through
HDMI with the TV remote control.
To see the details, click the How to Operate TV Connecting to SIMPLINK (HDMI-
CEC) in User Guide.
TV On With Mobile
General External Devices TV On With Mobile
If Turn on via Wi-Fi/Turn on via Wi-Fi(Networked Standby Mode) or Turn on via
Bluetooth/Turn on via Bluetooth(Networked Standby Mode) is set to On, you can
turn on your TV using an application that supports TV On With Mobile.
The TV should be connected to a network.
The TV and the device to be used should be connected to the same network.
The Turn on via Wi-Fi/Turn on via Wi-Fi(Networked Standby Mode) feature must be
used in an app on a smart device that supports the feature.
Turn on via Bluetooth/Turn on via Bluetooth(Networked Standby Mode) is only
available on some smartphones.
The TV must be plugged in.
To connect for the first time, make sure the device to be used is ready to connect.
Some models may not be supported.
Delete Connection History
General External Devices Delete Connection History
To Next Page
Loading...
