Troubleshooting 37
Troubleshooting
5
Problem Cause & Solution
The remote control does not work
properly.
y
The remote control is too far from the unit.
Operate the remote control within about 7 m (23 feet).
y
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
y
The batteries in the remote control are exhausted.
Replace the batteries with new ones.
USB is not recognized.
y
Format the USB device and connect it again. When formatting the
USB device, select the available le system. (Page 9)
To Next Page
Loading...
