47
ge
me
e.
e.
oto
er
from the numerical options:
3M
(2048x1536), 2M (1600x1200),
1M (1280x960), VGA (640x480),
QVGA (320x240)
.
ISO
– The ISO rating determines
the sensitivity of the camera’s
light sensor. The higher the ISO,
the more sensitive the camera
will be. This is useful under
darker conditions when you
cannot use the flash. Select from
ISO values of
Auto
,
400,200
and
100
.
White balance
– Choose from
Auto
,
Incandescent
,
Sunny
,
Fluorescent
, and
Cloudy
.
Timer
– The self-timer allows
you to set a delay after the
shutter is pressed. Select
Off
,
3
secs., 5 secs.
or
10 secs.
This is
ideal if you want to be included
in a photo.
Image quality
– Choose from
Super fine
,
Fine
, and
Normal
.
The finer the quality, the sharper
the photo. However, the file size
will increase as a result, which
means you’ll be able to store
fewer photos in the memory.
Auto review
– If you set Auto
review on, it will show you the
picture you have just taken
automatically.
Shutter sound
– Select one of
the four shutter sounds.
Tag location
– Activate to use
your phone’s location-based
services. Take pictures wherever
you are and tag them with the
location. If you upload tagged
pictures to a blog that supports
geotagging, you can see the
pictures displayed on a map.
NOTE:
This function is only
available when GPS is active.
Reset
– Restore all camera
default settings.
– Touch whenever you
want to know how this function
operates. This is to provide you
with a quick guide.
To Next Page
Loading...
