74
Settings
NFC– NFC (Near Field Communication) is a wireless technology that enables data
transmission between two objects when they are brought within a few centimetres of
each others. When you enable NFC on your phone, your phone can exchange data with
other NFC-enabled devices or read information from smart tags embedded in posters,
stickers, and other products.
Direct/Android Beam – Your LG-P710 is Direct/Android Beam-enabled mobile phone.
Direct/Android Beam (Near Field Communication) is a wireless connectivity technology
that enables two-way communication between electronic devices. It operates over a
distance of a few centimetres. You can share your contents with a Direct/Android Beam
tag or another device via simple touch with your device. If you touch a Direct/Android
Beam tag with your device, it will display the tag contents on your device.
NOTE: Be careful not to scratch or damage the inside of the battery cover as
this is the Direct/Android Beam antenna.
Using Direct/Android Beam: To use Direct/Android Beam, make sure your device is
switched on and activate the Direct/Android Beam setting, if disabled. You can beam
a web page, a video, or other content from your screen to another device by bringing
the devices together (typically back to back).
NOTE: Make sure both devices are unlocked, support Near Field
Communication (Direct/Android Beam), and have both Direct/Android Beam
and Android Beam™ turned on.
VPN – Displays the list of Virtual Private Networks (VPNs) that you've previously
configured. Allows you to add different types of VPN.
Mobile networks – Set options for network mode & operators, access point names
(APNs).
NOTE: You must set a lock screen PIN or password before you can use
credential storage.
To Next Page
Loading...
