LG P7200 - Page 26

3. TECHNICAL BRIEF
- 27 -
The backlight of LCD module is controlled by DBB via AAT2806IXN-4.5-T1 , U402. The control
signals related to Backlight LED are given bellow.
C. RF interface
The AD6527B control RF parts through PA_BAND, ANT_SW1, ANT_SW2, ANT_SW3 , CLKON ,
PA_EN, S_EN, S_DATA, S_CLK, RF_PWR_DWN.
Signals Description
LCD_DIM_CTL
Control LCD backlight level in 16 steps
(GPO 5)
LCD_LED_CTL Control LCD LED
LCD_LED_GND
LCD_BL_EN It controls back-light of LCD module.(GPO_23)
Table 3-3. DESCRIPTION OF LCD BACKLIGHT LED CONTROL
Signals Description
PA_BAND (GPO 17) PAM Band Select
ANT_SW1 (GPO 9) Antenna switch Band Select
ANT_SW2 (GPO 10) Antenna switch Band Select
ANT_SW3 (GPO 11) Antenna switch Band Select
CLKON RF LDO Enable/Disable
PA_EN (GPO 16) PAM Enable/Disable
S_EN (GPO 19) PLL Enable/Disable
S_DATA (GPO 20) Serial Data to PLL
S_CLK (GPO 21) Clock to PLL
RF_PWR_DWN(GPO 4) Power down Input
Table 3-4. RF CONTRON SIGNALS DISCRIPTION