<Water Communication Module>
PAHCMW000
Components
Water
Communication
Module
Thermistor
(Water In / Water Out /
Pipe In / Pipe Out)
OWNER’S &
INSTALLATION
MANUAL
Sensor Holder & Clip
Shape
Quantity 1 4 (each 5m) 1 4
SUPPLIES
[Unit: mm]
CAUTION
!
• This model requires DC12 V external power supply. (Select an insulating transformer that
complies with IEC61558-2-6 and NEC Class 2.)
• Please check the Product operation range below.
• The Ingress Protection marking for this product restricts installation location.
LG Electronics is not responsible for installation at locations non-compliant to the IP
rating.
Power Supply 12 V DC
Product Operation Range
Ambient Temperature -20 ~ 65 °C DB
Humidity 0~98 % (Non Condensing)
Product Protection Class IP Rating IP20
To Next Page
Loading...
