EasyManuals Logo

LG PB60G User Manual

LG PB60G
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #39 background imageLoading...
Page #39 background image
39
3D FUNCTION
CAUTION
Extra special care is required for chil-
dren watching a 3D video.
When Watching 3D Video
Watch 3D images within the optimum
viewing angle and distance.
If you are outside the viewing angle
or distance, you may not be able to
watch 3D images. You cannot view
3D images when you lie down.
You may see left and right images
overlapped during projector initializa-
tion after it is powered on. It may take
some time for optimization.
It may take some time for the 3D
image look normal after you turn your
eyes away from the screen and look
back at the 3D image.
It may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz - 60
Hz) or near windows. If so, it is rec-
ommended to block the sun light
with a curtain and to dim the lights.
The 3D glasses must be DLP-LINK
(DLP Ready) type.
You may not be able to watch 3D
properly if there is an obstacle be-
tween the projector and 3D glasses.
Install the 3D projector as far as pos-
sible from other devices.
Please check the following when using
3D glasses.
Do not use 3D glasses as ordinary
glasses, sunglasses or protective
goggles.
- If you do so, this may cause injury.
Do not store 3D glasses in very hot
or very cold conditions. If you do, this
may cause them to become distort-
ed. Do not use distorted glasses.
Do not drop 3D glasses or allow them
to come into contact with other ob-
jects.
- This can result in damage to the
product.
The lenses of 3D glasses are eas-
ily scratched. Use a soft clean cloth
when cleaning them.
- Foreign particles on the cloth may
cause scratches.
Do not scratch the surface of the 3D
glasses' lenses with sharp objects or
wipe them with chemicals.
- If the lenses get scratched, images
may not look normal when viewing
3D.
Please use 3D glasses certified by LG
Electronics.

Other manuals for LG PB60G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG PB60G and is the answer not in the manual?

LG PB60G Specifications

General IconGeneral
Native aspect ratio16:9
Projection distance- m
Projection technologyDLP
Supported aspect ratios4:3, 16:9
Contrast ratio (typical)15000:1
Digital gamma correctionYes
Screen size compatibility25 - 100 \
Projector native resolutionWXGA (1280x800)
Lamps quantity1 lamp(s)
Light source typeLED
Service life of light source30000 h
FocusManual
Offset100 %
Throw ratio1.5:1
Focal length range- mm
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 720p
Analog signal format system-
Supported graphics resolutions1280 x 720 (HD 720), 1280 x 800 (WXGA), 1680 x 1050 (WSXGA+), 1920 x 1080 (HD 1080), 854 x 480 (WVGA)
RMS rated power2 W
Number of built-in speakers2
Audio (L/R) in3
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity0
Noise level31 dB
CertificationKC/KCC, FCC/UL
Noise level (economic mode)26 dB
On Screen Display (OSD) languagesARA, CHI (SIMPL), DEU, ENG, ESP, FRE, GRE, ITA, KOR, POL, POR, RUS, SWE, TUR
PlacementDesktop, Tripod
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)60 W
Power consumption (standby)0.5 W
Cables includedAC, Component
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Depth103 mm
Width158 mm
Height33 mm
Weight470 g

Related product manuals