LG PREMTA200 - Setting temperature; Fan speed setting; Advanced functions; Menu

12
STANDARD OPERATION
Setting temperature
Select the setting temperature or current temperature
icon.
The set temperature area for the current operation
mode is displayed.
Set the desired temperature by adjusting the lever
left and right.
Use type
Operation
Model
Set temperature
1set
Cooling
-
60°F ~ 86°F(16°C ~ 30°C)
Heating
-
60°F ~ 86°F(16°C ~ 30°C)
Auto
Cooling
model
Cold, Little Cold, Good,
Little Hot, Hot
Cooling/
Heating
model
64°F ~ 86°F(18°C ~ 30°C)
2set
Auto
Cooling
50 ~ 99 °F (10 ~ 37.5 °C)
Heating
40 ~ 90 °F (4 ~ 32 °C)
1 SET
2 SET
NOTE
Dry/fan operation cannot set desired temperature.
The setting temperature may vary depending on
the type of indoor unit.
Fan speed setting
Select the fan speed icon to select the desired
fan speed from the options list.
Option
Low-Med
Med
High
Power
Auto
NOTE
Depending on the product, some functions cannot
be set.
“Auto” can only be used when installing CO
2
sensors when using ventilation products.
Advanced functions
You can use additional functions.
Please refer to the Additional Functions’ Detailed
Description page.
Menu
Select the menu icon to set the schedule, energy,
settings, and installer settings.
You can also check if there were any errors.
NOTE
If an error occurs, a notification icon is displayed
with the number of errors.