Select the Setup icon from the menu.
General settings for the use environment configuration, and product settings and SVC setting for using air
conditioner/ventilation products are available.
Set the language you will use
English / Español / Français
Set the type of use of wired remote controller
Set the temperature unit to be displayed on the screen.
Minimum unit can be set to
To use the standby screen, change the Always on setting to on, then
set the rest of the items in detail.
If the standby screen is used at 30% brightness, the life of
Set the operating standards for each schedule mode.
Set detailed operating standards for air conditioner
and ventilation products by Home, Sleep, Away, Awake
schedule mode of the current season.
Refer to the content of Schedule setting- Edit schedule
Set the date, time, and summer time to display on the screen.
You can use the product by temporarily changing the schedule
Select by toggling on/off of the function usage and set
the setting period and product operation standard in
Refer to the content of Schedule setting- Vacation/
You can reset the schedule by deleting it all at once.
This function locks the button on the remote controller to prevent
children and others from using it recklessly.
All Lock / Running mode Lock / Fan speed Lock/
Temperature Lock / Set temperature Lock
You can restart the system.
Set whether to display humidity value.
When it is set to “On”, the humidity value is different
depends on the humidity detection location setting
1) Remote controller: Display the humidity that remote
Indoor unit : Display the humidity that indoor unit
sensed. However, if no information is received, no
To Next Page
Loading...
