35
SUB FUNCTION SETTING
34
SUB FUNCTION SETTING
ENGLISH
Fan Auto Setting
Select fan operation after performing thermal control of indoor units.
If set to 'ON', fan operation keeps on after thermal operation of indoor units.
NOTE
!
The fan auto function is an additional function, and it may not be displayed/operated in some
products.
Plasma Purification Setting
It makes the indoor air clean and pleasant.
NOTE
!
The air cleaning function is an additional function, and it may not be displayed/operated in
some products.
The air cleaning function is possible only when the product is in operation.
If you want air cleaning single operation, set air cleaning in the wind only operation.
To Next Page
Loading...
