Assembly Diagram
Installation Manual 15
ENGLISH
n Wall mounted & Art cool
Step1. Mount independent power kit on the wall.
Step2. Connect wires (use a piping or wiring hole) and
assemble cover.
Step 1. Open the front panel of the control box.
Step 2. Assemble the cover of PRIP0, fix it tightly with bolts
and connect wires.
Do not install PRIP0 at places exposed to rain or any water.
Otherwise it may leads to electric shock, fire, injury or sometimes even fatality.
Independent power kit should be installed within 1 000 mm which is length of the given wires.
Otherwise Indoor EEV may cause malfunction.
n Hydro Kit
CAUTION
!
CAUTION
!
To Next Page
Loading...
