Caring for your dryer
16
C
aring for your dryer
Condenser
Condenser is also a very important part for efficient drying performance result so it needs a special care from you.
It is recommended that condenser be cleaned three or four times a year.
1. Open condensing cover by using a coin or flat
blade screwdriver.
2. Open sealing cover by turning
a locking lever.
3. Release the both locking levers turning
towards each other.
Sealing cover
< Front >
< Side >
6. Close all with the reverse order of opening.
CAUTION
- Operating when the heat exchanger is
clogged with lint can damage the dryer.
This also increases energy consumption.
-Do not use sharp objects to clean the heat
exchanger. You could damage it an cause
leaks.
- Never operate the dryer without the heat
exchanger.
5. Clean the condenser completely under the
tap letting water to flow through.
4. Draw the condenser out by inserting a finger
into a hole down the front of condenser.
(Don’t forcefully treat condenser.)
To Next Page
Loading...
Need help?
General
