52
INSTALLATION
piece of the mains drain hose, simply
change the water path and re-route to
the drainage facility as below:
1
Separate the anti-backflow lid
A
and
the water container hose
B
from the
connecting elbow or T piece.
2
Attach the anti-backflow lid
A
to the
head of the connecting elbow or T
piece and then connect the optional
drain hose
C
to the opposite side of
the connecting elbow or T piece.
• If the optional drain hose is installed in
a way that leaves it bent or pinched,
drainage may not function properly.
To Next Page
Loading...
Need help?
General
