18
PROGRAMMING MODE
OPL type
■ Algorithm Flow Chart shows how to control programming mode.
■ Before program set, check the structure of programming mode.
OPL/Coin Type
1) Push the High Temp. and Low Temp. button at the same time.
2) Push the Med Temp. button 3 times.
3) Push the Start button.
4) Display will show “ “
is to set price value, time value and vend type etc.
consists of line test, reset, free cycle and kill cycle.
Is to collect the usage data.
■ Structure of Programming mode
• Do not use , .
• It is only used in inspecting the machine.
NOTE
MFL62512875_150414.indd 18 2015.4.14 9:43:40 AM
To Next Page
Loading...
Need help?
General
