GPRS attach
(Menu 9.4.2.2)
You can set GPRS service depending on
various situations.
v
Power on
If you select this menu, the phone is
automatically registered to a GPRS
network when you switch the phone on.
Starting a WAP or PC dial-up application
created the connection between phone
and network and data transfer is
possible. When you end the application,
GPRS connection is ended but the
registration to the GPRS network
remains.
v
When needed
If you select this menu, the GPRS
connection is established when you
connect a WAP or application service
and closed when you end the WAP or
applicaion connection.
Network profile
(Menu 9.4.2.3)
v
Data connections
• Name: You can type the network
name.
•
Bearer: You can set the bearer data
service.
1 Data/2 GPRS
<Data settings>
Appears only if you select Data
Settings as a Bearer/service.
- Dial number: Enter the telephone
number to dial to access your WAP
gateway.
-
User ID: The users identity for your
dial-up server
(and NOT the WAP gateway).
-
Password: The password required
by your dial-up server (and NOT the
WAP gateway) to identify you.
-
Call type: Select the type of data
call; Analogue or Digital (ISDN).
Settings
Settings
88
To Next Page
Loading...
