LG SPT8-S Simple Manual

If you see a red LED on the wireless subwoofer or rear speaker, it means that the soundbar is not connected to the speakers.
If this is the case, connect them in the following order.
A Press the Power
button on the soundbar to turn it off.
B Press the PAIRING button on the back of the wireless subwoofer or rear speaker. Check if each LED blinks green.
- If you still see a red LED on the wireless subwoofer, press and hold the button on the back of the subwoofer again.
C Press the Power
button on the soundbar to turn it on.
D When the connection is established, you will see a green LED light on the wireless subwoofer or rear speaker light up.
Keep the soundbar, the subwoofer and rear speakers away from the device (ex. wireless router, microwave oven, etc.) over 1 m to
prevent wireless interference.
y Some speakers may not make sound depend on the input source. Select BASS BLAST (BASS BLAST+) sound mode to listen through
all speakers.
y Design and specifications are subject to change without notice.
y Google Play is a trademark of Google LLC.
S60TR.ADEULLK_SIMPLE_COV37836304.indd 5 2024-02-05  10:41:21

LG SPT8-S Specifications

General

Brand	LG
Model	SPT8-S
Category	Speaker System
Language	English