10
Checking connection status with the LED color
You can check the connection status with the LED on the rear speaker.
LED Color Status
Blinking green Connecting In progress
Green Connected successfully
Red Bad connection, or the rear speakers are in standby
Off Power cable not connected
Connecting the rear speakers manually
If you see a red LED on the rear speaker, it means that the sound bar is not connected to the rear
speakers. If this is the case, connect them in the following order.
a Press the Power button on the sound bar to turn it off.
b Press the PAIRING button on the back of the rear speaker. Check if the LED on the rear speaker is
blinking green.
c Press the Power button on the sound bar to turn it on.
d When the connection is established, you will see the LED light on the rear speaker light up in green.
Note
• Keep the rear speakers at least 30 cm (11.8 inch) away from the TV or monitor.
• To prevent wireless interference, maintain a distance of at least 1 m (3.3 ft) between the sound bar or
the rear speakers and any peripheral devices that generate strong electromagnetic waves (ex. wireless
routers, microwave ovens, etc.).
To Next Page
Loading...
Need help?
General
