7
e Plug the power cable into the soundbar.
f Plug the power cable connected to the soundbar into an outlet.
g Press the Power
button on the soundbar to turn it on.
h When the connection is automatically established, you will see the LEDs on the back of the wireless
subwoofer and wireless rear speakers light up in green.
Checking the connection with the LEDs on the back of the
wireless subwoofer and wireless rear speakers
You can check the connection status by looking at the LEDs on the back of the wireless subwoofer and
wireless rear speakers.
LED Color Status
Blinking green Connecting in progress
Green Connected successfully
Red
Bad connection, or the subwoofer or wireless rear speakers are in
standby
Off Power cable not connected
To Next Page
Loading...
Need help?
General
