LG StudioWorks 570LE - Page 10

- 9 -
5. BACKLIGHT REMOVAL
(1) Remove two screws (a).
(2) Remove the Backlight from the LCD Module.
6. LCD MODULE REMOVAL
(1) Remove four screws (a).
(2) Separate the LCD Module from the Main Frame.
Bottom (Lower) Backlight Ass’y
Top (Upper) Backlight Ass’y
LCD Module
(a)
(a)
(a)
(a)
(a)
(a)
(a)
(a)
CN2
J5
CN3
J2
J3
(a)
(d)
(d)
(d)
(d)
(b)
(b)
(a)
(c)
(c)
Front Cabinet
4. INVERTER, POWER, CONTROL,
AND MAIN PCB ASSEMBLY REMOVAL
(1) Disconnect J8, J2 and J7.
(2) Remove four screws (a).
(3) Remove the Main PCB Ass’y.
(4) Disconnect CN2 and CN3.
(5) Remove two screws (b).
(6) Remove the Inverter PCB Ass’y.
(7) Remove two screws (c).
(8)
Remove the Control and Power PCB Ass’y.
(9) Remove four screws (b).
(10) Remove the Front Cabinet.