LG SXS - Refrigerator Operation and Features; Initial Startup and Temperature Control

Operation
18
Starting
When your refrigerator is first installed, allow it to stabilize at normal operating
temperatures for 2-3 hours prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
Adjusting the temperatures and functions
Function display board
Refreshment
Center
1
LOCK STATUS
This indicator shows the current status for
the control panel functions.
2
EXPRESS FRZ.
When the EXPRESS FRZ. button is pressed,
the display will indicate the selected
function has been activated.
3
DISPENSER SELECTION INDICATOR
Shows Cubed ice or Crushed Ice selection
that will be dispensed when the push switch
is pressed.
4
ICE ON/OFF INDICATOR
Shows Icemaker's "ON" or "off" selection
that will be operated when "Ice on" is
lighted.
5
FREEZER TEMPERATURE
Indicates the set temperature of the freezer
compartment in Celsius.
6
REFRIGERATOR TEMPERATURE
Indicates the set temperature of the
refrigerator compartment in Celsius.
7
Pure N Fresh INDICATOR
This indicator shows the current status for
the Pure N Fresh. See “How to remove the
old filter.”
8
DISPENSER LIGHT INDICATOR
When the LIGHT button is pressed, the
display will indicate the selected function:
The dispenser light is on, this indicator will
appear on the display panel.
9
WATER FILTER STATUS
This indicator shows the current status for
the water filter. See Resetting the Filter
Indicator.
EZ-handle
Easily opens the door.
Pulling too
strongly can cause
damage. Do not
remove the rubber.