13
INSTALLATION
EN
• Do not install the appliance on any elevated
surface or platform, as it may become unstable
and cause serious injury and damage.
• If the appliance is installed on a uneven, weak or
tilted floor causing excessive vibration, spin
failure or
UE
error can occur. It must be placed
on a firm and level floor to prevent spin failure.
Assembling the Anti-Rat Cover
You can insert the anti-rat cover according to the
type to protect the appliance from the rat.
1
Lay the appliance backwards.
• Be careful your feet or hands when you lay or
raise the appliance.
2
Insert the anti-rat cover to the assembling hole
from the back of the appliance.
3
Insert the 2 screws into the holes to assemble
the anti-rat cover to the appliance.
To Next Page
Loading...
