nationwide prepaid cellular
talk smart
howtoprogram
Parameter Also Called: Details Value
MCC Mobile Country
Code
Determines default country. USA: 310
MNC Mobile Network
Code
Determines default network. 00
Primary Channel: Determines default primary frequency channel 283
Secondary Chan-
nel: System A
Determines default secondary frequency channel
used on Scan A
691
Primary Channel: Determines default primary frequency channel 384
Secondary Chan-
nel: System B
Determines default secondary frequency channel
used on Scan B
777
Home System Reg-
istration
Enables the phone to allow mobile terminated calls
while in the home system. Controls the types of
CDMA registration allowed for the phone.
Yes
Foreign SID Regis-
tration
Enables the phone to allow mobile terminated calls
while in a foreign system. Controls the types of FM
and CDMA registration allowed for the phone.
Yes
Foreign NID Regis-
tration
Enables the phone to allow mobile terminated calls
while in a foreign system. Controls the types of FM
and CDMA registration allowed for the phone.
Yes
Lock SID Enables you to specify up to six SIDs that the
phone is prohibited from acquiring in CDMA mode.
The user may be denied service when operating
within the service areas of these systems.
0
PRL Enable Enables the Preferred Roamer’s List Yes
1615 Timberwolf Drive • Holland, OH 43528 • 1-800-550-2436 Phone • 419-382-8729 Fax
Dealer Handbook Page 28 of 28
Last revised on October 31, 2008 Copyright © 1993 to 2008 by Page Plus Cellular, All Rights Reserved.
All information contained in this document is property of Page Plus Cellular. Any dissemination, distribution, or duplication of this material, information, or
communication is strictly prohibited without the consent of the original writer (author). If you are not the intended recipient, or you have received this information
in error, please notify the author immediately and destroy all electronic and hard copies of the document or file, including attachments.