14
DIAGNOSTIC TEST
35
1. This TEST should be used for Factory test /Service test. Do not use this DIAGNOSTIC TEST other than specified.
2. Activating the heater manually with the door open may trip the thermostat attached to the heater, therefore do
not activate it manually. (Do not press the door switch to operate the heater while the door is open).
This program has been added for testing the dryer and detecting errors.
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use .
Note
Diagnostic test: (display)
1
Pressing the START button cycles to the next test function.
To Next Page
Loading...
