LG TCD1870QGS - Programming Mode - Test Mode; Entering Test Mode

42
PROGRAMMING MODE
PROGRAMMING MODE - Test Mode
Diagnostic tests : (display)
This program has been added for testing the dryer and detecting errors.
Entering the test mode
Machine
Data
Name
Button Display Description
Card/
Coin
type
Enter-
ing
the test
mode
1. Entering
programming
mode
Insert service card (card type), Turn on/o toggle switch
(Coin type).
2. High Temp.
Press the High Temp. button.
Then appears in the display.
3. Start
Enter the diagnostic test mode.
OPL /
Coin
type
1. Entering
programming
mode
Push and hold the High Temp. and Low Temp. at the same time.
After that push Med Temp. button for 3 times. Push
Start button.
2. High Temp.
Press the High Temp. button.
Then appears in the display.
3. Start
Enter the diagnostic test mode.
MFL67863709_en_170328.indd 42 2017-03-28 �� 9:54:38