I
nstallation Instructions
6
1.
Levelling the dryer is to prevent undesirable
noise and vibration.
2. Place your dryer in a solid and level area
where water is not dripping, freezing.
2.
If the dryer is not properly level, adjust the
levelling legs up and down as necessary.
2. Turn them clockwise to raise and
counterclockwise to lower until the dryer is not
wobbling both front-to-back and side-to-side.
Diagonal Check
When pushing down the edges of the washing machine,
the machine should not move up and down at all.
(Please, check both of two directions) If machine rocks
when pushing the machine top plate diagonally, adjust
the feet again.
Level the dryer
Installation Instructions
To Next Page
Loading...
