Example of Fuction Code Display
Function Code Value #1 Value #2
Code Item Detail Remark
01 Function Additional refrigerant charging
Description Instant cooling operation for charging additional refrigerant
Value #1 Note -
Default 01
Range -
Value #2 Note -
Default -
Range -
02 Function Disable 3 minute delay
Description Factory use only
Value #1 Note -
Default 01
Range -
Value #2 Note -
Default -
Range -
03 Function Remote air sensor connection
Description Connection information about remote air sensor
Value #1 Note 01:Remote air sensor is not connected and not used.
02:Remote air sensor is connected and used.
Default 1
Range 01 ~ 02
Value #2 Note -
Default -
Range -
04 Function Celsius / Fahrenheit switching
Description Display temperature in Celsius or Fahrenheit
Value #1 Note 01:Celsius
02:Fahrenheit
Default 1
Range 01 ~ 02
Value #2 Note -
Default -
Range -
System Set-Up
78 Air-to-Water Heat Pump
To Next Page
Loading...
