LG TROMM LSF100 - Option Cycle Selection

9
Option Cycle
When you select a cycle, washing starts with the default
settings of options. If necessary
, change the options as
shown belo
w.
: Soil
: Temp.
: Rinse
: Spin
: Add Option
1
Press the Power button.
2
Select a washing programme.
3
Select options you want to change.
4
Change the options and Press the OK button.
5
Press the Start/Pause button.
Soil
Light Soi
l
Use this option when the soil level is lower than a
general washing laundry
.
Normal Soi
l
Use this option for general washing
.
Heavy Soil
Select this option to wash the laundry with heavy soil
with more power compared to the standard wash of
each cycle.
Temp.
The button selects the wash and rinse temperature
combination for the selected cycle. Press the desired
setting. All rinses use cold tap water.
•
Select the water temperature suitable for the type of
load you are washing. Follow the garment fabric care
labels for best results.
Rinse
Rinse
+
Add rinse once.
Rinse
++
Add rinse twice.
Normal + Hold
The course is paused until start button is pressed again
Rinse
+
+ Hold
Add rinse once then after rinsing process, the course is
paused until Start/Pause button is pressed again.
Spin
•
Spin speed level can be selected by pressing the
button repeatedly.
NOTE
•
When you select ‘No Spin’, it will still rotate for a
short time to drain quickly.
•
The spin setting range may be different depending
on cycles.