20
ENGLISH
Attaching the VESA design cover
1 Place the monitor’s screen face down. To protect the screen from scratches, cover the surface with a soft
cloth.
2 Place the VESA design cover on the monitor in a slightly slanted position so its hooks can be inserted to
the slots of the main unit.
3 Push the VESA design cover in the slanted position until it touches the other side.
4 Push down on the VESA design cover.
CAUTION
• Check whether the detach button has been pushed to the right after attaching the VESA design cover. If the
button has not been pushed to the right, push it into position with your hands.
To Next Page
Loading...
