Custom-designed Features 10
Ţ The device may generate static electricity if the surrounding air is dry.
If the surrounding air is dry, avoid scanning fingerprints, or touch a
metallic object, such as a coin or key, to remove static electricity before
scanning fingerprints.
Registering fingerprints
You can register and save your fingerprint on the device to use fingerprint
identification.
1
Tap Settings General Fingerprints & security
Fingerprints.
Ţ This feature is available when the screen lock is set.
- Lock the device with a Knock Code, pattern, PIN or password.
Ţ If the screen lock is not set, configure the lock screen by following the
on-screen instructions. See
Configuring the screen lock settings
for
details.
2
Locate the Power/Lock key on the back of the device and gently put
your finger on it to register the fingerprint.
Ţ Ensure that your fingertip covers the entire surface of the sensor on the
Power/Lock key.
To Next Page
Loading...
