Front camera lens
Proximity/Ambient Light Sensor
Earpiece
Second screen
Headset jack
Microphone
Speaker
Rear Camera Lens
Flash
Power/Lock Key, Fingerprint Sensor
Back cover release Key
Charger/USB port (C-type)
Laser Detection Auto-Focus Sensor
Volume Keys
Parts overview Parts overview Inserting the battery Inserting the battery
1 Press the back cover release key located at
the bottom side of the device.
Back cover release key
2 Grab the back cover and remove it from the
device.
3 Align the battery with the battery contacts
and insert it in place . Then to install the
back cover, align it over the back of the phone.
Battery contacts
4 First press down on the area labeled in the
image below. Then press down on
until the
back cover is tightly fastened.
QUICK START GUIDE
MBM65581501 (1.0)
U.S. Cellular®
Customer Care:
1-888-944-9400
To Next Page
