2.3.5 Cable Connections
2.3.5.1 Power and Ignition Cables
Connect the red wire to the car battery positive terminal and the black wire to the car ground. Connect the
green wire to the car ignition sensor terminal. ( In order to operate HFK please make sure to connect green wire
to ignition sensor terminal.) Connect the kit’s power cable connector to the interface box power receptacle.
2.3.5.2 Antenna Cable Connection
Connect the antenna coupler cable connector from the cradle to the external antenna connector. ( Antenna is
not included.)
LGE Internal Use Only Copyright@2007 LG Electronics. Inc. All right reserved.
-14-
Only for training and serving purposes
Z3X-BOX.COM
To Next Page
Loading...
