28
Disconnect the wiring connector.
Unscrew 2 screws from the back.
When reconnecting the connector
Cold only model
Cold and Hot model
Open the lower cover CAP by using coin and pull out
the lower cover in the arrow direction after a screw is
unscrewed.
INLET VALVE ASSEMBLY
LOWER COVER
VALVE#1 (MAIN) Whited/Black-Black
VALVE#2 (PRE) Gray/ White - Black
VALVE #1 (MAIN) Whited/Black-Black
VALVE #2 (PRE) Gray/ White - Black
VALVE #3 (HOT) Blue/Red - Black
Get other manuals https://www.bkmanuals.com
To Next Page
Loading...
