20
ow to use washer
H
SpinTime Delay
Preparing washing before starting “Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
• How to set “Time Delay”
- Press Power( ) button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause( ) button.
(“ ” blinks)
• If Time Delay button is pressed, “3:00” is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
• Each pressing of the button advances time
delay by one hour.
• To cancel the time delay, press the
Power( ) button.
• Time Delay is ‘expected time’ from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.
• By pressing the Spin button,
the spin speed can be
chosen.
• Spin speed is available according to the
program as follows.
- Cotton & Cotton-Eco & Quick 30
No Spin-400-800-1000-1200
- Synthetic & Wool/Silk & Hand Wash &
Duvet
No Spin-400-800-1000
- Delicate
No Spin-400-800
• If “No Spin” is selected, the washer stops
after draining water.
The required lamp will light up for
identification.
1. Spin selection
2. No spin
To Next Page
Loading...
