LG WD-12331(6)RD - DOOR; GASKET

31
① Disconnect the wiring connector.
② Remove the valve by two screws of the valve
holder.
󳢮When reconnecting the connector
2
1
3
4
INLET VALVE
VALVE 󳡉 (DRY) YL/BK - BK
VALVE 󳡊 (PRE-WASH) GY/WH - BK
VALVE 󳡋 (NORMAL-WASH)
WH/BK - BK
VALVE
󳡌
(HOT) BL/RD - BK
① Remove the lower cover to arrow direction
after one screw is unscrewed.
COVER LOWER
① Rotate the Cap(Remaining Hose) to arrow
direction.
② Pull it out from hose.
※ First, prepare a bucket to put in the remained
water.
Cap(Remaining Hose)
Removing method of remained water